【干货】华为AC/AP的基础配置
发布作者：微思网络 发布时间：2017-08-04 浏览量：0次
AP就是传统有线网络中的HUB，也是组建小型无线局域网时最常用的设备。AP相当于一个连接有线网和无线网的桥梁，其主要作用是将各个无线网络客户端连接到一起，然后将无线网络接入以太
网。
下面看一下华为无线AP、AC的配置实例：
配置Switch
[Switch]vlan batch 100 101
//管理Vlan100 业务vlan101
[Switch]interface GigabitEthernet0/0/1
[Switch-GigabitEthernet0/0/1]port link-type trunk
[Switch-GigabitEthernet0/0/1]port trunk pvid vlan 100
//给接AP的端口打上管理vlan100的PVID
[Switch-GigabitEthernet0/0/1]port trunk allow-pass vlan 100 101
[Switch-GigabitEthernet0/0/1]quit
[Switch]interface GigabitEthernet0/0/2
[Switch-GigabitEthernet0/0/2]port link-type trunk
[Switch-GigabitEthernet0/0/2]port trunk allow-pass vlan 100 101
[Switch-GigabitEthernet0/0/2]quit
厦门电脑培训教你配置AC
1. 配置接口和VLAN信息，AC为DHCP Server，为AP和client分配地址
[AC]vlan batch 100 101
[AC]interface GigabitEthernet0/0/1
[AC-GigabitEthernet0/0/1]port link-type trunk
[AC-GigabitEthernet0/0/1]port trunk allow-pass vlan 100 101
[AC-GigabitEthernet0/0/1]quit
[AC]dhcp enable
[AC]interface vlanif 100
//配置管理vlan100的IP地址 并且开启DHCP
[AC -Vlanif100]description for-ap
[AC -Vlanif100]ip address 192.168.100.1 24
[AC -Vlanif100]dhcp select interface
[AC-Vlanif100]quit
[AC]interface vlanif 101
//配置业务vlan101的IP地址 并且开启DHCP
[AC -Vlanif101]description for-STA
[AC -Vlanif101]ip address 192.168.101.1 24
[AC -Vlanif101]dhcp select interface
[ACVlanif101]quit
2. 配置AC WLAN基础配置
[AC]wlan ac-global ac id 1 carrier id other
[AC]wlan ac-global country-code CN
[AC]wlan
[AC -wlan-view]wlan ac source interface Vlanif 100
// 配置AP的管理VLAN，从哪个VLAN下拿地址
[AC-wlan-view]ap-auth-mode no-auth
// 将AP上线模式改为不认证‘
此配置做完后在全局查询AP
display ap all
查看AP是否上线
ap id 0 type-id 38 mac 0006-f468-91a0 sn 21500821798W47001474 （AP上线后会自动生成）
3.配置AC WLAN 业务参数
#创建wlan-ess接口
[AC]interface Wlan-Ess 1
//之后会与下面 service-set（服务集）绑定
[AC-Wlan-Ess0]port hybrid pvid vlan 101
//打上业务vlan101的PVID
[AC-Wlan-Ess0]port hybrid untagged vlan 101
//打上业务vlan101的PVID
[AC-Wlan-Ess0]quit
#创建WMM模板，采用默认参数
[AC-wlan-view]wmm-profile name wmm-profile-0
[AC -wlan-wmm-prof-wmm-profile-0]quit
//之后会与下面 radio-profile（射频）模板绑定
#创建安全模板，采用默认参数
[AC-wlan-view]security-profile name security-profile-0
[AC-wlan-sec-prof-security-profile-0]quit /之后会与下面service-set（服务集）绑定
{如果需要为无线设置密码则：
security-policy wpa-wpa2
设置无线的加密方式
wpa-wpa2 authentication-method psk pass-phrase cipher 12344321 encryption-method tkip-ccmp
设置加密算法，密码，密文处为密码}
#创建流量模板，采用默认参数
[AC-wlan-view]traffic-profile name traffic-profile-0
[AC-wlan-traffic-prof-traffic-profile-0]quit //之后会与下面 service-set（服务集）绑定
#创建服务集并绑定WLAN-ESS接口、安全模板和流量模板
[AC-wlan-view]service-set name service-set-0
[AC-wlan-service-set-service-set-0]ssid SSID-Temp1
[AC-wlan-service-set-service-set-0]wlan-ess 1
[AC-wlan-service-set-service-set-0]service-vlan 101
[AC-wlan-service-set-service-set-0]security-profile name security-profile-0
[AC-wlan-service-set-service-set-0]traffic-profile name traffic-profile-0
#创建射频模板，并绑定WMM模板
[AC-wlan-view]radio-profile name radio-profile-0
[AC-wlan-radio-prof-radio-profile-0]wmm-profile name wmm-profile-0
[AC-wlan-radio-prof-radio-profile-0]quit
#配置VAP并下发
[AC-wlan-view]ap 0 radio 0
[AC-wlan-radio-0/0]radio-profile name radio-profile-0
[AC-wlan-radio-0/0]service-set name service-set-0
[AC-wlan-radio-0/0]quit
[AC-wlan-view]commit ap 0
