【每日必学】ASA Multi-Contexts Active.Active Failover
发布作者：微思网络 发布时间：2017-05-18 浏览量：0次
实验拓扑:
配置 ASA1:
hostname ASA interface Ethernet0/0
no shutdown
interface Ethernet0/1 no shutdown
interface Ethernet0/2 no shutdown
interface Ethernet0/3 no shutdown
interface Management0/0 no shutdown
failover
failover lan unit primary
failover lan interface fo Management0/0 failover key cisco
failover interface ip fo 10.1.1.1 255.255.255.0 standby 10.1.1.2 failover link fo Management0/0
admin-context admin context admin
config-url disk0:/admin.cfg
context c1
allocate-interface Ethernet0/0 allocate-interface Ethernet0/1 config-url disk0:/c1.cfg join-failover-group 1
context c2
allocate-interface Ethernet0/2 allocate-interface Ethernet0/3 config-url disk0:/c2.cfg join-failover-group 2
failover group 1 primary preempt
failover group 2 secondary preempt
context c1 join-failover-group 1
context c2 join-failover-group 2
泉州CCNP培训教你配置 ASA2:
interface Management0/0 no shutdown
failover
failover lan unit secondary
failover lan interface fo Management0/0 failover key cisco
failover interface ip fo 10.1.1.1 255.255.255.0 standby 10.1.1.2 failover link fo Management0/0
手工改变设备的主用状态:
ASA1: Group 1 为 Acitve , Group 2 为 Standby failover active group 1
ASA2: Group 2 为 Active , Group 1 为 Standby failover active group 2
验证:
在 ASA1: 组 1 , Group 1 为 Acitve , 组 2 , Group 2 为 Standby
在 ASA2: 组 2 , Group 2 为 Active , 组 1 , Group 1 为 Standby
